Process Water Treatment Products

Boiler Water Treatment

Cooling Towers
Water Treatment

Protect ion by reducing Corrosion and Scale to Increase efficiency by reducing Blowdown and down time for cleaning. This also will provide Steam purity and Safe operation. Overall Reduction in maintenance costs and capital expenses of buying new plants

Our Products

Alktboast B25, DS

Pack Sizes:5lts, 20lts

Alkboast B25 is a concentrated alkaline solution for use in systems where ahydroxide alkalinity builder is required.
Recommended for use in steam boilers and in cooling towers where higher alkalinity is needed

Data Sheet

Alktboast B25, DS
Biotreat CMT-545

Biotreat CMT545

Pack Sizes: 5lts, 20lts

Biotreat CMT545 is a concentrated liquid micro biocide based on isothiazolin designed for broad spectrum control of algae, bacteria and fungi in recirculating cooling towers,

Data Sheet

Biotreat CMT545

BIOTREAT MQT530 DS

Pack Sizes: 5lts, 20lts

Biotreat MQT530 is a quick-kill industrial biocide with broad spectrum biocidal activity against algae, fungi, bacteria and particularly sulphate reducing bacteria.

Key Benefits

  • Stable in pH range 2 – 12
  • Can be used with oxidizing and non-oxidizing agents
  • Not detrimental to the environment at levels normally discharged fromcooling towers
  • Effective against aerobic and anaerobic microbes
  • Product is not adversely affected by temperature fluctuations

Data Sheet

BIOTREAT MQT530 DS

Boilerguard BG72 PSD

Pack Sizes: 5lts, 20lts

Boilerguard BG72 is sulphite-based formulation used for eliminating oxygen corrosion in boiler water systems. It is used where very rapid oxygen removal from feed water is required.

Data Sheet

Boilerguard BG72 PSD

Boilerguard BG63 PSD

Pack Sizes: 5lts, 20lts

Boilerguard BG63 is a Phosphate Polymer Boiler Water Dispersant and Antiscalant liquid specifically designed to prevent build-up of deposits on the waterside surfaces and to reduce foaming tendencies.

Key Benefits

  • Extremely cost effective.
  • Easy to monitor and control – minimum dosage for maximum results.
  • Non corrosive thus ensuring longer equipment life, even during overfeed situations.
  • Gives clean passivated internals, ensuring maximum heat transfer and thus efficiencies

Data Sheet

Boilerguard BG63 PSD

Coltreat ECPA PSD

Pack Sizes: 5lts, 20lts

A multifunctional scale and corrosion inhibitor for industrial open recirculating cooling water systems. Designed for use as corrosion control supplemental product to be used along with dispersant polymer. This product is most effective in cooling systems with corrosive water and low to medium hardness and/or alkalinity. Provides protection over a wide range of operating conditions.

Key Benefits

  • Management of cooling system operation based on the operational stresses placed upon it.
  • Extended tube bundle and equipment life due to reduced corrosion and scale
  • Reduced energy costs due to cleaner heat transfer surfaces

Data Sheet

Coltreat ECPA PSD

Multreat MZ DS

Pack Sizes: 5lts, 20lts

Recirculating water in cooling towers can cause scale and corrosion of system. These problems reduce heat transfer efficiency, increase pumping costs, increase maintenance time and rrepair costs. The end result of these problems is expensive downtime, high energy consumption, and large equipment repair costs. Tower makeup water that is low in hardness and alkalinity is less.likely to fomi scale.but will corrode system metals. An effective cooling water treatment must therefore prevent both scale and corrosion. Multreat MZ represents a“state-of-the-art” cooling water treatment.,” Multreat MZ works well with or without acid feed for alkalinity control. Corrosion is inhibited by a synergistic combination of molybdate, zinc, and an azole corrosion inhibitor which act together to form a passive film on the metal surfaces. Scaling tendencies are greatly reduced by addition of a stable, chlorine resistant, organic phosphonate.

Key Benefits

  • Inhibits Scale Formation
  • Can be Fed Direct from packing Container
  • Excellent Corrosion inhibitor
  • Easy dosage Control
  • Effective with or Without pH Control
  • Effective Silt dispersant

Data Sheet

Multreat MZ DS

SteamGuard 301 PSD

Pack Sizes: 5lts, 20lts

SteamGuard 301 is a liquid corrosion inhibitor, based on volatile amines.

Key Benefits

  • Rapid neutralization of carbon dioxide and other acidic impurities evolved with steam
  • Cab be used where steam comes in contact with food
  • Prevents grooving and other corrosive damage to return lines
  • Product level is easily checked by means of a test kit

Data Sheet

SteamGuard 301 PSD

CoolCare MZ

Pack Sizes: 5lts, 20lts

Corrosion inhibitor and scale dispersant based on suitable cathodic inhibitors and selected Polymers. Protects mild steel as well as soft metals. Well suited for soft waters and higher temperatures.

Key Benefits

  • Superb Corrosion and Scale Control
  • Can be Fed undiluted
  • Easy to Use and Control  Excellent Corrosion inhibitor
  • Effective with or Without pH Control
  • Effective Silt dispersant

Data Sheet

CoolCare MZ

We are always ready to talk to you

Our  comprehensive programs and services are the best fit for you

Back to Top